HPV12-20 HyPerformance (HPV12-20)

<div>
<h3>Product Operation</h3>
With inlet at port 1, the HPV12-20 will regulate flow out of port 2 regardless of system working pressure with flow rate proportional to current applied to the solenoid.
</div>
<div>
<h3>Product Features</h3>
• Continuous-duty rated solenoid with optional coil voltages and terminations. 
• Hardened spool and cage for long life. 
• Efficient wet-armature construction. 
• Cartridges are voltage interchangeable. 
• Unitized, molded, waterproof E-Coils rated up to IP69K.• 1000-hour salt-spray rated solenoid tubes and coils.• All HyPerformance™ products are tested to the rigorous standards of the NFPA specification T<a title="2.6.1" href="https://www.savery.co.uk/products/view/2-6-1">2.6.1</a>.• All HyPerformance™ valves are tested at a verification level of 90% and an assurance of 99%.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)Note: All HyPerformance™ products are tested for 900K cycles at 350 bar and 100K cycles at 420 bar. 
Burst Pressure: 1241 bar (18,000 psi) 
Proof Pressure: 690 bar (10,000 psi) 
Regulated Flow Rate: 0 to 68 lpm (0 to 18 gpm) 
Max. Internal Leakage: 0.38 lpm (0.10 gpm) at port 2 at zero current and 345 bar (5000 psi) pressure at port 1 
Temperature: -54° to 107°C (-65° to 225°F) with PPDI Urethane seals 
Hysteresis: ±1.9 lpm (0.50 gpm) maximum 
Dither/PWM Frequency Range: 100 to 250 Hz 
Electrical Parameters (with size 10 E-series coil): 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Installation: No restrictions; See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a>. 
Cavity: HVC12-2 Cavity Variation “A”; See page <a title="9.112.1" href="https://www.savery.co.uk/products/view/9-112-1">9.112.1</a> 
Cavity Tool: HCT12-2X-XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: HSK12-2U-O; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> 
Coil Nut: Part No. 7004420 
Max. Control 
Current 1050 ± 100 mA 525 ± 50 mA 
Threshold 
Current 250 ± 100 mA 125 ± 50 mA 
Coil 
Voltage12 VDC24 VDC 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL 
TM 
Proportional Flow 
ISO SYMBOL 
<a title="2.332.1" href="https://www.savery.co.uk/products/view/2-332-1">2.332.1</a>
</div>

2-332-1-symbols

2-332-1-image-dimensions

2-332-1-main-image

2-332-1-symbols-graphs-image

A solenoid-operated, electrically-variable, two-port, pressure-compensated, spool-type, normally closed when de-energized, proportional flow control valve for high pressure applications up to 350 bar (5075 psi).

HPV12-21 HyPerformance (HPV12-21)

<div>
<h3>Product Operation</h3>
With inlet at port 1, the HPV12-21 regulates flow out of port 2 regardless of system working pressure. Increasing current applied to the solenoid will decrease output flow.
</div>
<div>
<h3>Product Features</h3>
• Continuous-duty rated solenoid with optional coil voltages and terminations. 
• Hardened spool and cage for long life. 
• Efficient wet-armature construction. 
• Cartridges are voltage interchangeable. 
• Unitized, molded, waterproof E-Coils rated up to IP69K.• 1000-hour salt-spray rated solenoid tubes and coils.• All HyPerformance™ products are tested to the rigorous standards of the NFPA specification T<a title="2.6.1" href="https://www.savery.co.uk/products/view/2-6-1">2.6.1</a>.• All HyPerformance™ valves are tested at a verification level of 90% and an assurance of 99%.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi)Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K cycles at 420 bar. 
Burst Pressure: 1241 bar (18,000 psi) 
Proof Pressure: 690 bar (10,000 psi) 
Regulated Flow Rate: 0 to 61 lpm (0 to 16 gpm) 
Max. Internal Leakage: 0.38 lpm (0.10 gpm) at port 2 at zero current and 345 bar (5000 psi) pressure at port 1 
Temperature: -54° to 107°C (-65° to 225°F) with PPDI Urethane seals 
Hysteresis: ±1.9 lpm (0.50 gpm) maximum 
Dither/PWM Frequency Range: 100 to 250 Hz 
Electrical Parameters (with size 10 E-series coil): 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Installation: No restrictions; See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a>. 
Cavity: HVC12-2 Cavity Variation “A”; See page <a title="9.112.1" href="https://www.savery.co.uk/products/view/9-112-1">9.112.1</a> 
Cavity Tool: HCT12-2X-XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: HSK12-2U-O; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> 
Coil Nut: Part No. 7004420 
Threshold 
Current 100 ± 50 mA 50 ± 25 mA 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL 
TM 
Proportional Flow 
ISO SYMBOL 
<a title="2.342.1" href="https://www.savery.co.uk/products/view/2-342-1">2.342.1</a>
</div>

2-342-1-symbols

2-342-1-image-dimensions

2-342-1-main-image

2-342-1-symbols-graphs-image

A solenoid-operated, electrically-variable, two-port, pressure-compensated, spool-type, normally open when de-energized, proportional flow control valve for high pressure applications up to 350 bar (5075 psi).

HSP10-20 HyPerformance™ Proportional, Poppet, 2-Way, (HSP10-20)

<div class="product-info group">
<div>
<h3>Product Operation</h3>
When de-energized, the HSP10-20 blocks flow from ports 2 to 1. In this mode, the cartridge will allow flow from ports 1 to 2 after overcoming the spring forces (seePerformance graph). When energized, the valve will allow flow proportional to theapplied current from ports 2 to 1 while severely restricting flow from ports 1 to 2. 
Note: If low voltage is expected on the machine, 12 or 24 volt systems will require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil Operating Parameters,” page <a title="2.002.1" href="https://www.savery.co.uk/products/view/2-002-1">2.002.1</a>.
</div>
<div>
<h3>Product Features</h3>
• Industry-common cavity. 
• Efficient wet-armature construction. 
• Continuous-duty rated coils. 
• Waterproof E-Coils rated up to IP69K. 
• Manual override option.• All HyPerformance products are tested to the rigorous standards of the NFPA specification T<a title="2.6.1" href="https://www.savery.co.uk/products/view/2-6-1">2.6.1</a>.• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi) 
Flow Rating: 53 lpm (14 gpm) with 11 bar (160 psi) compensation; 34 lpm (9 gpm) with 5.5 bar (80 psi) compensation 
Max. Internal Leakage: 5 drops per minute at 350 bar (5075 psi) at port 2 
Cycle Life: One million cycles 
Temperature: -54° to 107°C (-65° to 225°F) with urethane seals 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a>; 
Installation: No Restrictions. See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a> 
Cavity: HVC10-2; See page <a title="9.110.1" href="https://www.savery.co.uk/products/view/9-110-1">9.110.1</a>; 
Cavity Tool: HCT10-2XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: HSK10-2U-0 Urethane; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> 
Coil Nut: Part No. 4553800; for E-coils manuf. prior to 1-1-04, see page <a title="3.400.1" href="https://www.savery.co.uk/products/view/3-400-1">3.400.1</a>. 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL 
<a title="2.011.1" href="https://www.savery.co.uk/products/view/2-011-1">2.011.1</a> 
ISO SYMBOLCURRENT (amps)1.2 amps = 100% of Max. Control CurrentFLOW (lpm/gpm)Flow vs. Current, 242 bar (3000 psi)Inlet with No Compensation100 Hz Dither Frequency0.40.60.81.01.20.2227/60189/50151/40114/3076/2038/10 
PERFORMANCECURRENT (amps)1.2 amps = 100% of Max. Control CurrentFLOW (lpm/gpm)Flow vs. CurrentWith Compensation100 Hz Dither Frequency0.40.60.81.01.20.260.6/1653.0/1445.4/1237.9/1030.3/822.7/67.6/215.0/4160 psiCompensated80 psiCompensatedPressure Drop vs. Flow32 cSt/150 sus oil at 40°C69/100055/80041/60028/40014/20015430845121.00 A0.70 A1.24 A6116FLOW lpm/gpmPRESSURE DROP bar/psi7620De-Energized 1–2ORCE.com®
</div>
</div>
<div class="product-related"> </div>

2-011-1-symbols

2-011-1-graphs-image

2-011-1-image-dimensions

2-011-1-symbols-image

2-011-1-main-image

A high pressure proportional solenoid-operated, two-way, piloted, poppet-type, nor-mally closed, screw-in hydraulic cartridge valve for low-leakage blocking and load-holding applications.

HSP10-21 HyPerformance™ Proportional, Poppet, 2-Way, (HSP10-21)

<div>
<h3>Product Operation</h3>
When de-energized, the HSP10-21 allows flow proportional to the applied current from from ports 2 to 1 while severely restricting flow from ports 1 to 2. When ener-gized, the valve blocks flow from ports 1 to 2 after overcoming the spring and actuator forces (see performance graph.) 
Note: If low voltage is expected on the machine, 12 or 24 volt systems will require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil Operating Parameters,” page <a title="2.002.1" href="https://www.savery.co.uk/products/view/2-002-1">2.002.1</a>.
</div>
<div>
<h3>Product Features</h3>
• Industry-common cavity. 
• Efficient wet-armature construction. 
• Continuous-duty rated coils. 
• Optional waterproof E-Coils rated up to IP69K.• All HyPerformance products are tested to the rigorous standards of the NFPA specification T<a title="2.6.1" href="https://www.savery.co.uk/products/view/2-6-1">2.6.1</a>.• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi) 
Flow Rating: 53 lpm (14 gpm) with 11 bar (160 psi) compensation; 34 lpm (9 gpm) with 5.5 bar (80 psi) compensation 
Max. Internal Leakage: 5 drops per minute at 350 bar (5075 psi) at port 2 
Cycle Life: One million cycles 
Temperature: -54° to 107°C (-65° to 225°F) with Urethane seals 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Installation: No Restrictions. See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a> 
Cavity: HVC10-2; See page <a title="9.110.1" href="https://www.savery.co.uk/products/view/9-110-1">9.110.1</a> 
Cavity Tool: HCT10-2XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: SK10-2U-0 Urethane; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> 
Coil Nut: Part No. 4553800; for E-coils manuf. prior to 1-1-04, see page <a title="3.400.1" href="https://www.savery.co.uk/products/view/3-400-1">3.400.1</a> 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL 
<a title="2.021.3" href="https://www.savery.co.uk/products/view/2-021-3">2.021.3</a> 
ISO SYMBOLCURRENT (amps)1.2 amps = 100% of Max. Control CurrentFLOW (lpm/gpm)Flow vs. Current, 242 bar (3000 psi)Inlet with No Compensation100 Hz Dither Frequency0.40.60.81.01.20.2227/60189/50151/40114/3076/2038/10 
PERFORMANCECURRENT (amps)1.2 amps = 100% of Max. Control CurrentFLOW (lpm/gpm)Flow vs. CurrentWith Compensation100 Hz Dither Frequency0.40.60.81.01.20.260.6/1653.0/1445.4/1237.9/1030.3/822.7/67.6/215.0/480 psiCompensated160 psiCompensatedORCE.com®Pressure Drop vs. Flow32 cSt/150 sus oil at 40°C69/100055/80041/60028/40014/20015430845120.25 A0.50 A0 A6116FLOW lpm/gpmPRESSURE DROP bar/psi7620De-Energized 1–2
</div>

2-021-3-symbols

2-021-3-graphs-image

2-021-3-image-dimensions

2-021-3-main-image

2-021-3-symbols-image

A high pressure proportional solenoid-operated, two-way, piloted, poppet-type, normally open, screw-in hydraulic cartridge valve for low-leakage blocking and load-holding applications.

HSP16-20 HyPerformance (HSP16-20)

<div>
<h3>Product Operation</h3>
When de-energized, the HSP16-20 blocks flow from ports 2 to 1. In this mode, the cartridge will allow flow from ports 1 to 2 after overcoming the spring forces (see performance graph). When energized, the valve will allow flow from ports 2 to 1 while severely restricting flow from ports 1 to 2. 
Note: If low voltage is expected on the machine, 12 or 24 volt systems will require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil Operating Parameters,” page <a title="2.002.1" href="https://www.savery.co.uk/products/view/2-002-1">2.002.1</a>.
</div>
<div>
<h3>Product Features</h3>
• Industry-common cavity. • Efficient wet-armature construction.• Continuous-duty rated coils. • Waterproof E-Coils rated up to IP69K.• 1000-hour salt-spray rated solenoid tubes.• All HyPerformance products are tested to NFPA specification T<a title="2.6.1" href="https://www.savery.co.uk/products/view/2-6-1">2.6.1</a>, and are tested at a verification level of 90% and an assurance of 99%.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi) 
Fatigue Rating: 2 million cycles at 420 bar 
Burst Pressure: 1380 bar (20,000 psi) 
Flow: Up to 75.7 lpm (20 gpm); see performance curves. 
Maximum Control Current: 1.2 amps 
Max. Internal Leakage: 7 drops per minute at 345 bar (5000 psi) inlet 
Temperature: -54° to 107°C (-65° to 225°F) with Urethane seals 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Installation: See note re: voltage under OPERATION heading. See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a> 
Cavity: HVC16-2; See page <a title="9.116.1" href="https://www.savery.co.uk/products/view/9-116-1">9.116.1</a>; 
Cavity Tool: HCT16-2XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: SK16-2U-O; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a>; 
Coil Nut: Part No. 4553800 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL 
ISO SYMBOL 
<a title="2.016.1" href="https://www.savery.co.uk/products/view/2-016-1">2.016.1</a> 
PERFORMANCE 
Recommended Electronic Controllers:See page <a title="2.001.1" href="https://www.savery.co.uk/products/view/2-001-1">2.001.1</a> or our Electronics catalog.FLOW lpm/gpm227/60246/65189/50208/55151/40170/45114/30133/3576/2095/2538/1019/557/15FLOW vs. CURRENT at Various Inlet Pressureswith 12 VDC Coil — 32 cSt/150 sus oil at 40°CPERCENT of MAX. CONTROL CURRENT1020304050607080901000.10.20.30.40.50.60.70.80.91.01.11.2 AMP345 bar5000 psi35 bar500 psi104 bar1500 psi11 bar160 psi5.5 bar80 psi381076201133015140189502276026570FLOW lpm/gpm35/50069/1000103/1500138/2000172/2500207/3000PRESSURE bar/psiTYPICAL PRESSURE RESPONSE0.75A0.85A0.90A0.95A1.00A1.20A1 to 2 De-EnORCE.com®
</div>

2-016-1-symbols

2-016-1-graphs-image

2-016-1-image-dimensions

2-016-1-main-image

2-016-1-symbols-image

A proportional solenoid-operated, 2-way, piloted, poppet-type, normally closed, screw-in hydraulic cartridge valve for low-leakage blocking and load-holding in high pressure applications requiring low internal leakage.

HSP16-21 (HSP16-21)

<div>
<h3>Product Operation</h3>
When de-energized, the HSP16-21 allows flow proportional to the applied current from 2 to 1 while severely restricting flow from 1 to 2. When energized, the valve blocks flow from ports 2 to 1. In this mode, the cartridge will allow flow from 1 to 2 after overcoming the spring and actuator forces.
</div>
<div>
<h3>Product Features</h3>
• Industry-common cavity. 
• Efficient wet-armature construction. 
• Continuous-duty rated coils. 
• Optional waterproof E-Coils rated up to IP69K.• 1000-hour salt-spray rated solenoid tubes.• All HyPerformance products are tested to NFPA specification T<a title="2.6.1" href="https://www.savery.co.uk/products/view/2-6-1">2.6.1</a>, and are tested at a verification level of 90% and an assurance of 99%.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi) 
Proof Pressure: 690 bar (10000 psi) 
Burst Pressure: 1380 bar (20000 psi) 
Flow Rating: 76 lpm (20 gpm) with 5.5 bar (80 psi) compensation; 95 lpm (25 gpm) with 11.0 bar (160 psi) compensation 
Max. Internal Leakage: 7 drops per minute at 350 bar (5075 psi) at port 2 
Cycle Life: One million cycles 
Operating Fluid Temperature: -54 to 107°C (-65 to 224°F) with urethane seals 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Installation: No Restrictions. See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a> 
Cavity: HVC16-2; See page <a title="9.116.1" href="https://www.savery.co.uk/products/view/9-116-1">9.116.1</a> 
Cavity Tool: HCT16-2XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: SK16-2U-0 (urethane); See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> 
Coil Nut: Part No. 7004400 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL 
HyPerformance 
TM 
Poppet, 2-Way, N. O. 
ISO SYMBOL 
<a title="2.023.3" href="https://www.savery.co.uk/products/view/2-023-3">2.023.3</a> 
PERFORMANCEORCE.com® 
Recommended Electronic Controllers:See page <a title="2.001.1" href="https://www.savery.co.uk/products/view/2-001-1">2.001.1</a> or our Electronics catalog.FLOW lpm/gpm113.6/3094.6/2575.7/2056.8/1537.9/1018.9/5FLOW vs. CURRENT5.5 bar (80 psi) Compensated11.0 bar (150 psi) CompensatedCURRENT (ampere)0.10.20.30.40.50.60.70.80.91.0PRESSURE RESPONSE (Cartridge only) 2-1, De-energized; 1-2, Energized 37.91075.720113.630151.440189.350227.160FLOW lpm/gpm13.8/20027.6/40041.1/60055.2/80068.9/100082.7/1200PRESSURE bar/psi265.070
</div>

2-023-3-symbols

2-023-3-graphs-image

2-023-3-image-dimensions

2-023-3-symbols-image

2-023-3-main-image

A proportional solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in hydraulic cartridge valve for low-leakage blocking in high pressure load-holding applications requiring low internal leakage.

PV16-23 Proportional Flow Control Cartridge, (PV16-23)

<div>
<h3>Product Operation</h3>
When de-energized, the PV16-23 blocks flow from ➀ to ➁. With increasing current applied to the solenoid, output flow from ➀ to ➁ will increase proportionally.The PV16-23 is intended for use with an operating differential across the valve 
of 7 bar to 11 bar (100 psi to 160 psi). The set value of the external pressure 
compensator or pump control must provide for both the valve operating differential, 
as well as for system losses between the compensator and the PV16-23 at the 
maximum required flow. 
Operation of Manual Override: To Engage: Turn clockwise approximately 1 turn to 
reach start point. Continue another approximately 5 turns to full shift. To Disengage: 
Turn counterclockwise approximately 6 turns to positive stop.
</div>
<div>
<h3>Product Features</h3>
• Excellent linearity and hysteresis characteristics. 
• Hardened spool and cage for long life. 
• Optional coil voltages and terminations. 
• Effi cient wet armature construction.
</div>
<div>
<h3>Product Ratings</h3>
Maximum Operating Pressure: 241 bar (3500 psi) 
Maximum Flow Rate: 95 to 170 lpm (25 to 45 gpm); see performance graphs. 
Maximum Internal Leakage: 0.38 lpm (0.10 gpm) at port ➁ with 13.8 bar (200 psi) at port ➀ with no current applied. 
Electrical: EHPR08 Coil, 2 standard voltage ratings 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Installation: No restrictions; See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a>. 
Cavity: VC16-2; See page <a title="9.116.1" href="https://www.savery.co.uk/products/view/9-116-1">9.116.1</a>; 
Cavity Tool: CT16-2XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: SK16-2X-M; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> for seal kit options and appropriate seals based on application temperature range.
</div>

2-348-1-symbols

2-348-1-graphs-image

2-348-1-image-dimensions

2-348-1-symbols-image

2-348-1-main-image

A solenoid-operated, two-way, normally closed, electro-proportional, hydraulic cartridge valve intended for use with an external pressure compensator or load-sensing-style pump control.

PV72-20 Proportional Flow Control Cartridge, (PV72-20)

<div>
<h3>Product Operation</h3>
The PV72-20 will regulate flow out of port ➁ regardless of system working pressure. With an increasing current applied to the solenoid, the PV72-20 will increase output 
flow. 
Operation of Manual Override: To Engage: Turn clockwise approximately 1 turn to reach start point. Continue 
another approximately 5 turns to full shift.To Disengage: Turn counterclockwise approximately 6 turns until positive stop 
is found.
</div>
<div>
<h3>Product Features</h3>
• Excellent linearity and hysteresis characteristics. 
• Hardened spool and cage for long life. 
• Effi cient wet armature contsruction. 
• Optional coil voltages and terminations.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: Port ➀: 240 bar (3500 psi); Port ➁: 207 bar (3000 psi) 
Regulated Flow Rate: 0 to 64 lpm (0 to 17 gpm) 
Internal Leakage: .38 lpm (0.1 gpm) fully closed at 207 bar (3000 psi) 
Electrical: 2 standard voltage ratings 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Installation: No restrictions; See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a>. 
Cavity: VC12-2 Cavity Variation “B”; See page <a title="9.112.1" href="https://www.savery.co.uk/products/view/9-112-1">9.112.1</a> 
Cavity Tool: CT12-2X-XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: SK12-2X-M; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> for seal kit options and appropriate seals based on application temperature range. 
Threshold 
Current 150 ± 100 mA 75 ± 50 mA 
Coil 
Voltage12 VDC24 VDC 
Max. Control 
Current 1500 ± 100 mA 750 ± 50 mA691000PRESSURE DROP bar/psiFLOW lpm/gpmRegulated Flow vs. Pressure DropInput Pressure: 240 bar/3500 psi12V Coil; 110 Hz PWM32 cSt/150 ssu oil at 40°C1382000207300075.6/2060/1645/1230/815/4 
HYDRAFORCE.com® 
• Cartridges voltage interchangeable. 
• Unitized, molded coil design. 
• Coil waterproofi ng standard. 
• Manual override option. 
Recommended Electronic Controllers:See page <a title="2.001.1" href="https://www.savery.co.uk/products/view/2-001-1">2.001.1</a> or our Electronics catalog.
</div>

2-330-1-symbols

2-330-1-graphs-image

2-330-1-image-dimensions

2-330-1-symbols-graphs-image

2-330-1-main-image

A solenoid-operated, electrically-variable, two-port, pressure-compensated, spool-type, normally closed when de-energized, proportional flow control valve.

PV72-21 Proportional Flow Control Cartridge, (PV72-21)

<div class="product-info group">
<div>
<h3>Product Operation</h3>
The PV72-21 will regulate flow out of port ➁ regardless of system working pressure. With an increasing current applied to the solenoid, the PV72-21 will decrease output 
flow. 
Operation of Manual Override: To Engage: Turn clockwise approximately 1 turn to reach start point. Continue 
another approximately 5 turns to full shift.To Disengage: Turn counterclockwise approximately 6 turns until positive stop 
is found.
</div>
<div>
<h3>Product Features</h3>
• Excellent linearity and hysteresis characteristics. 
• Hardened spool and cage for long life. 
• Effi cient wet armature construction. 
• Optional coil voltages and terminations.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: Port ➀: 240 bar (3500 psi); Port ➁: 207 bar (3000 psi) 
Regulated Flow Rate: 56 lpm (15 gpm) 
Internal Leakage: .38 lpm (0.1 gpm) fully closed at 207 bar (3000 psi) 
Electrical: 2 standard voltage ratings 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a> 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Installation: No restrictions; See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a>. 
Cavity: VC12-2, Cavity Variation “B”; See page <a title="9.112.1" href="https://www.savery.co.uk/products/view/9-112-1">9.112.1</a> 
Cavity Tool: CT12-2X-XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: SK12-2X-M; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> for seal kit options and appropriate seals based on application temperature range. 
• Cartridges voltage interchangeable. 
• Unitized, molded coil design. 
• Coil waterproofi ng standard. 
• Manual override option. 
Coil 
Voltage12 VDC24 VDC 
Threshold 
Current150 ± 100 mA75 ± 50 mA 
Max. Control 
Current1350 ± 150 mA675 ± 75 mA691000PRESSURE DROP bar/psiFLOW lpm/gpmRegulated Flow vs. Pressure DropInput Pressure: 240 bar/3500 psi12V Coil; 110 Hz PWM32 cSt/150 ssu oil at 40°C1382000207300075.6/2060/1645/1230/815/4 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROLS 
HYDRAFORCE.com® 
Recommended Electronic Controllers:See page <a title="2.001.1" href="https://www.savery.co.uk/products/view/2-001-1">2.001.1</a> or our Electronics catalog.
</div>
</div>
<div class="product-related">
&nbsp;
</div>

2-340-1-symbols

2-340-1-graphs-image

2-340-1-image-dimensions

2-340-1-main-image

2-340-1-symbols-graphs-image

A solenoid operated, electrically-variable, two-port, pressure-compensated, spool-type, normally open when de-energized, proportional flow control valve.

SP08-20 Poppet, 2-Way, Normally Closed (SP08-20)

<div class="product-info group">
<div>
<h3>Product Operation</h3>
When de-energized, the SP08-20 acts as a check valve, allowing flow from 1 to 2, and blocking flow from 2 to 1. When energized, the 2 to 1 flow path is opened. Flow is proportional to current applied to the coil. Flow varies with manual override. 
Note: If low voltage is expected on the machine, 12 or 24 volt systems will require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil Operating Parameters,” page <a title="2.002.1" href="https://www.savery.co.uk/products/view/2-002-1">2.002.1</a>.
</div>
<div>
<h3>Product Features</h3>
• Industry-common cavity. 
• Efficient wet-armature construction. 
• Continuous-duty rated coils. 
• Optional waterproof E-Coils rated up to IP69K. 
• Manual override options.
</div>
<div>
<h3>Product Ratings</h3>
Operating Pressure: 207 bar (3000 psi) 
Flow: Without Manual Override: 22 lpm (5.8 gpm) at 34.5 bar (500 psid)With Manual Override: 18.4 lpm (4.8 gpm) at 34.5 bar (500 psid) 
Minimum Operating Dither/Pulse Frequency: 70 Hz 
Hysteresis: Less than 5% up to 85% of I-max.; Less than 10% above 85% of I-max. 
Max. Internal Leakage: 5 drops per minute at 250 bar (3625 psi) 
Temperature: -40 to 120°C with standard Buna seals 
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page <a title="9.060.1" href="https://www.savery.co.uk/products/view/9-060-1">9.060.1</a> 
Filtration: See page <a title="9.010.1" href="https://www.savery.co.uk/products/view/9-010-1">9.010.1</a>; 
Installation: No Restrictions. See page <a title="9.020.1" href="https://www.savery.co.uk/products/view/9-020-1">9.020.1</a> 
Cavity: VC08-2; See page <a title="9.108.1" href="https://www.savery.co.uk/products/view/9-108-1">9.108.1</a>; 
Cavity Tool: CT08-2XX; See page <a title="8.600.1" href="https://www.savery.co.uk/products/view/8-600-1">8.600.1</a> 
Seal Kit: SK08-2X-T; See page <a title="8.650.1" href="https://www.savery.co.uk/products/view/8-650-1">8.650.1</a> 
Coil Nut: Part No. 7004400; For E-coils manuf. prior to 1-1-04, see page <a title="3.400.1" href="https://www.savery.co.uk/products/view/3-400-1">3.400.1</a> 
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL
</div>
</div>
<div class="product-related"> </div>

2-008-1-symbols

2-008-1-graphs-image

2-008-1-image-dimensions

2-008-1-main-image

2-008-1-symbols-image

A proportional solenoid-operated, two-way, poppet-type, normally closed, screw-in hydraulic cartridge valve for low-leakage blocking and load-holding applications



Default Confirmation

Enter consent agreement text here.  The Consent Field will store this agreement text with the form entry in order to track what the user has consented to.

Admin Notification

New Newsletter Submission

Newsletter

BFPA-Logo-White

ISO9001 LOGO_White

ISO14001 LOGO_White

SP16-21 Poppet, 2-Way, Normally Open (SP16-21)

SP16-20 Poppet, 2-Way, Normally Closed (SP16-20)

SP12-21 Poppet, 2-Way, Normally Open (SP12-21)

SP12-20 Poppet, 2-Way, Normally Closed (SP12-20)

SP10-25 Proportional, Spool, 2-Way, Normally Closed (SP10-25)

SP10-24 Spool, 2-Way, Normally Closed, Metering (SP10-24)

SP10-21 Poppet, 2-Way, Normally Open (SP10-21)

SP10-20 Poppet, 2-Way, Normally Closed (SP10-20)

SP08-25 Spool, 2-Way, Normally Open (SP08-25)

SP08-24 Spool, 2-Way, Normally Closed (SP08-24)

Electro-Proportional Valves

Proportional Flow Control Valves, 2-Way

electro-valves-1

24.03.28_BAR_Savery_2577

Bespoke Projects

<ul class="ul1">
<li class="li1">Bespoke lubrication systems for testing Aerospace propulsion using high temperature fluids and test article scavenge capability</li>
<li class="li1">Bespoke lubrication solution for testing Automotive EV components.</li>
<li class="li1">Bespoke assembly rigs for Aircraft landing gear with built in test facilities.</li>
<li class="li1">Bespoke pressure testing and flushing rigs for Aircraft assembly plants.</li>
<li class="li1">Purpose design test benches for fluid power components.</li>
<li class="li1">Ground support trolleys for production and field use for Aircraft testing.</li>
<li class="li1">Hydraulic ring mains for aircraft production and servicing.</li>
<li class="li1">Hydraulic Infrastructure for test houses.</li>
</ul>

Bespoke-Projects

140223Savery_154

140223Savery_175 (1)

Savery Hydraulics have a highly experienced team for fluid control for hydraulic, electronic control, installation and project management. Using this experience we have supported customers with a wide range of projects which are not traditionally considered hydraulic equipment. Some examples of bespoke projects we have successfully delivered are:-

Savery_2_comp

hero-bg

Hydraforce

Hydraforce products meet global quality standards including ISO 9001, QS 9000 and CE. Every Hydraforce valve, coil, solenoid, manifold and electro-hydraulic control goes through rigorous testing and inspection to perform beyond industry standards.

Savery offers one of the most comprehensive lines of hydraulic valves, solenoids and coils and is the UK distributor for the Hydraforce range of products for the mobile and industrial equipment markets, including high performance valves for flow rates of 0.4 to 530lpm and pressure up to 420 bar.

Tile_image

Savery_36_comp

Tile_backgorund_image_No_2

Hydraulic Control Systems  

Tailored Solutions for Precision Control 
Our in-house hardware and software design team is dedicated to delivering cost-effective and reliable solutions for a wide array of control system needs. From embedded microcontroller systems to large-scale machine controls, we excel in designing and developing systems that meet the most demanding specifications. 
&nbsp;
Cloud-Based Monitoring for Seamless Access 
We offer cloud-based system monitoring solutions that provide 24/7 access through smart phone or tablet apps, giving you real-time insights into your operations from anywhere. 
&nbsp;
Industry-Leading Expertise 
With extensive experience across various industries, including aerospace, automotive, wind turbine testing, marine, and industrial sectors, our engineers bring invaluable expertise to every project. 
 
Hardware and Software Capabilities 
Small-Scale Control Systems: We design cost-effective control systems in-house using bespoke electronic control boards giving you optimal performance for your specific needs. 
Microchip Programming: We specialise in programming microchips for specialist applications in fluid power, providing tailored solutions for precise control. 
Large-Scale Machine Control Systems: Our capabilities include designing dedicated Motor Control Centre (MCC) cabinets and implementing System Control and Data Acquisition (SCADA) plant monitoring for seamless operation of complex machinery. 
Software Authoring: We are proficient in various software platforms, including: 
<ul>
<li>Delta Motion Controllers </li>
<li>National Instruments LabView© </li>
<li>National Instruments LabWindows CVI© </li>
<li>PLCs: Allen Bradley, Siemens, Omron, Schneider, Bachmann, Koyo </li>
<li>HMI and SCADA Systems: Siemens, Schneider, Bachmann, Koyo </li>
</ul>
 
Cost-Effective Solutions, Tailored to Your Needs 
Our deep understanding of different control systems enables us to select the most cost-effective platform to suit your systems development, ensuring you get the best value for your investment. 
At Savery, we are committed to delivering innovative, reliable, and tailored solutions that optimise the performance of your hydraulic systems, empowering you to achieve your goals with precision and efficiency.  
Get in touch with us today to discuss your project needs.

140223Savery_125

140223Savery_127

140223Savery_155

140223Savery_126

At Savery, we design and manufacture electronic systems that ensure the safe and efficient control and monitoring of hydraulic equipment. Our expertise lies in providing comprehensive control system solutions tailored to your specific requirements, with a focus on bespoke applications. 

Hydraulic-Control-System

Savery_39_comp

24_03_28_BAR_Savery_3818

Hydraulic Control Systems

24.03.28_BAR_Savery_2711

Hydraulic Power Unit

Our power units vary from compact, fixed pump systems to intricate setups featuring multiple variable displacement pumps and energy-saving variable speed drive technology. These units can be equipped with control manifolds for basic relief unloading functions or complex hydraulic control circuitry, custom-made for your application. 
We offer bespoke electrical control equipment that can manually or automatically control the power source, adhering to all current safety standards. This can be paired with simple condition monitoring for parameters such as flow, pressure, level, temperature, and fluid condition, or with advanced SCADA data recording for remote access via the cloud. This ensures safe and reliable 24/7 operation of equipment. 
Our power units can include fluid reservoirs ranging from 10 litres to over 14,000 litres, with built-in bund containment to meet regulatory requirements. 
With Savery, you’re in safe hands. We work with you from conception through design, project planning, installation, commissioning, and servicing to deliver a cost-effective and efficient hydraulic and control solution. 
We have successfully completed projects in various industries, including: 
<ul>
<li data-leveltext="" data-font="Symbol" data-listid="2" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="1" data-aria-level="1">Civil: Flood Barriers, Roll-on/Roll-off dock equipment </li>
<li data-leveltext="" data-font="Symbol" data-listid="2" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="2" data-aria-level="1">Marine: Ship Stabiliser, steering and deck equipment (with in-house 60 Hz testing capability) </li>
<li data-leveltext="" data-font="Symbol" data-listid="2" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="3" data-aria-level="1">Testing Infrastructure: Automotive, Aerospace, research and production component testing </li>
<li data-leveltext="" data-font="Symbol" data-listid="2" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="4" data-aria-level="1">Mechanical Handling: Large Scissor lifts </li>
<li data-leveltext="" data-font="Symbol" data-listid="2" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="5" data-aria-level="1">Defence and Security: Specialist equipment </li>
<li data-leveltext="" data-font="Symbol" data-listid="2" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="6" data-aria-level="1">Wind: Turbine Blade testing </li>
</ul>
Trust Savery Hydraulics for your hydraulic power needs.

Hydraulic-Power-Unit

At Savery Hydraulics, we specialise in the design and manufacture of hydraulic power units tailored to customer specifications. Our offerings range from single fractional power motors to multiple pump sets, with power installations up to 2 Mw. 

Savery_11_comp

24.03.28_BAR_Savery_2719

24.03.28_BAR_Savery_4084

Savery custom manifolds can be designed as part of a new power unit or to enhance your existing equipment & machinery. Custom designed manifolds offer no-leak, screw-in components with fast and easy valve removal and replacement. 

ManifoldAssembly

Our team of experienced engineers can simplify the most complex hydraulic circuits to reduce cost, improve reliability, minimise pipe work connections and the physical size &amp; weight of the solutions.
Custom manifold assemblies are: 
<ul>
<li data-leveltext="" data-font="Symbol" data-listid="1" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="1" data-aria-level="1">Designed by our engineers in house using the latest 3D CAD software for integration into your product. </li>
<li data-leveltext="" data-font="Symbol" data-listid="1" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="2" data-aria-level="1">Designed utilising Hydraforce cartridge valves and a vast range of other manufacturer’s components to achieve the required performance. </li>
<li data-leveltext="" data-font="Symbol" data-listid="1" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="3" data-aria-level="1">Machined using modern CNC equipment with specialist tooling to ensure high quality. </li>
<li data-leveltext="" data-font="Symbol" data-listid="1" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="4" data-aria-level="1">Manufactured from aluminium, steel or stainless steel to meet system pressure, flow and application requirements. </li>
<li data-leveltext="" data-font="Symbol" data-listid="1" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="5" data-aria-level="1">Designed in conjunction with your engineers to ensure we meet your unique requirements and installation needs. </li>
<li data-leveltext="" data-font="Symbol" data-listid="1" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="6" data-aria-level="1">Supplied in a variety of sizes from small manifold blocks with cartridges capable of controlling low(a few litres per minute) flow rate up to large complex assemblies for hundreds of litres per minute. </li>
<li data-leveltext="" data-font="Symbol" data-listid="1" data-list-defn-props="{&quot;335552541&quot;:1,&quot;335559685&quot;:720,&quot;335559991&quot;:360,&quot;469769226&quot;:&quot;Symbol&quot;,&quot;469769242&quot;:[8226],&quot;469777803&quot;:&quot;left&quot;,&quot;469777804&quot;:&quot;&quot;,&quot;469777815&quot;:&quot;multilevel&quot;}" aria-setsize="-1" data-aria-posinset="7" data-aria-level="1">Supplied fully assembled &amp; tested in our UK facility &amp; meeting the necessary ISO recommended guidelines for hydraulic cleanliness prior to dispatch. </li>
</ul>

Manifold-Assembly

24.03.28_BAR_Savery_2587

Savery custom manifolds can be designed as part of a new power unit or to enhance your existing equipment & machinery. Custom designed manifolds offer no-leak, screw-in components with fast and easy valve removal and replacement.

Manifold Assembly

For Product page (2) (1)

Contact Us

Savery hydraulic power packs and mini power packs are the culmination of many years of experience in manufacturing AC and DC power packs.

Small HydraulicPower Packs

The PB300 series of power units offer the latest design and features not normally associated with this type of unit. The units have a pressure of 300 bar, which is achieved by the use of high specification materials. The centre adaptor where the unit is cased, is made using an advanced aluminium manifold die-casting process, eliminating porosity to give a lightweight assembly.
Applications for this type of unit are numerous DC units for battery powered use include our tail lift packs and can be found on tippers, aerial access equipment and material handling trucks. AC units with power ratings from 0.25kW to 5.5kW have an even greater range of applications including the retail and service industry for the handling of goods &#8211; loading and unloading of vehicles and the lift industry for lifts installed in the home, disabled lifts and automotive assembly plants.
Savery has developed hydraulic power packs specifically for applications such as dock levellers, which provide a bridge between the loading bay and the truck being loaded or unloaded.
PB300 units have;
<ul>
<li>DC units 12V &amp; 24V / 0.2 – 3.5kW.</li>
<li>AC units 3 Phase &amp; 1 Phase / 0.25 – 5.5kW.</li>
<li>A vast range of control options for single and double acting circuits.</li>
<li>Advanced pressure die-cast aluminium centre adaptor.</li>
<li>The ability to eliminate porosity.</li>
</ul>
<img loading="lazy" decoding="async" class="alignnone size-full wp-image-5274" src="https://cms.savery.co.uk/wp-content/uploads/2024/03/E11-Logo.jpg" alt="" width="110" height="48" />

Small-Hydraulic-Power-Pack

Product page tile image (1)

Mini-packs-

Product_Page_Image

Savery offer a complete and comprehensive range of hydraulic power units, incorporating highly flexible, cost effective modular construction suited to both OEM and small users. The design of units for special applications is an important part of Savery’s marketing activities and our engineers can develop a unit to perfectly match our customer’s requirements.

Savery hydraulic power packs and mini power packs are the culmination of many years of experience in manufacturing AC and DC power packs.


Proportional Flow Control Valves, 2-Way

HPV12-20 HyPerformance (HPV12-20)

HPV12-21 HyPerformance (HPV12-21)

HSP10-20 HyPerformance™ Proportional, Poppet, 2-Way, (HSP10-20)

HSP10-21 HyPerformance™ Proportional, Poppet, 2-Way, (HSP10-21)

HSP16-20 HyPerformance (HSP16-20)

HSP16-21 (HSP16-21)

PV16-23 Proportional Flow Control Cartridge, (PV16-23)

PV72-20 Proportional Flow Control Cartridge, (PV72-20)

PV72-21 Proportional Flow Control Cartridge, (PV72-21)

SP08-20 Poppet, 2-Way, Normally Closed (SP08-20)

Proportional Pressure Control Valves, Relief

Proportional Pressure Control Valves, Reducing:Relieving

Proportional Flow Regulators, Pressure Compensated

Proportional Flow Control Valves, Bi-Directional

Proportional Flow Control Valves, 3-Way

Proportional Flow Control Valves, 2-Way

Proportional Directional Valves, 5-Way

Proportional Directional Valves, 4-Way

Proportional Directional Valves, 3-Port with Load Sense

Savery also offer

Bespoke Projects

Hydraforce

Hydraulic Control Systems

Hydraulic Power Unit

Manifold Assembly

Small Hydraulic Power Packs